Roll Hardness Tester – Parotester 2
Roll Hardness Tester – Parotester 2

The Parotester 2 roll hardness tester provides accurate and reliable evaluations of the roll hardness, hardness profile and hardness variation of paper, foil and film rolls. With Proceq’s roll hardness tester, unevenly wound reels can be spotted prior to interruption of operations and cause of quality problems in printing and converting operations.

By taking Leeb readings across the roll, uneven, too soft or too hard winding can be detected and the roll can be rejected. This minimizes the risk of complications e.g. during the printing process on paper.

Automatic loading and unloading of the impact body by pressing the impact device to the roll as implemented in the Parotester 2 roll hardness tester results in fast and repeatable tests of greater resolution than the commonly used Original Schmidt type L hammer tester.

 

Features
  • The Leeb hardness value (HL) immediately indicates the winding tightness. The measurement with the roll hardness tester is objective and precise
  • The high resolution (1 LU) facilitates comparatively small differences in hardness to be revealed
  • The large LCD display of the roll hardness tester enables an immediate visual assessment of the values
  • The unit can be easily programmed for individual user requirements
  • About 5’000 single measurements can be stored internally. The data can be retrieved via RS 232C for further processing on a PC (use Parolink 3 or Hyperterminal software) or directly printed
  • Using the external barcode reader (accessory part), roll identifications can be quickly captured and accurately read from the barcode of rolls
  • The paper roll hardness tester Parotester 2 is robusta and requires little maintenance
Applications
  • This roll hardness tester is well suited for the paper industry
  • Foils, films and other plastic sheet materials where a low impact energy is required
  • Special metal applications (also see metal hardness tester Equotip 3)
Standardization

    The roll hardness tester complies with the following standards:

    • TAPPI T834
    Technical Data
    Roll hardness tester Parotester 2 unit incl. probe
    Testing methodLeeb rebound
    Available probeU
    Contact force120 N
    Spherical test calottestainless steel 50 mm tip diameter
    (tip hardness 60 HRC)
    Max. material penetration4.0 mm
    Resolution1 LU; 1 R
    Accuracy± 6 LU (1 % at 600 LU)
    Roll hardness tester Parotester 2 display unit
    Dimensions175 x 180 x 80 mm (6.9 x 7.1 x 3.15 in.)
    Weight750 g (incl. batteries)
    Materialshock resistant ABS plastic
    Displaylarge LCD
    Internal data storage~ 5'000 values
    CommunicationRS 232C
    PC applicationParolink 3 software (not included in standard unit);
    alternatively use Hyperterminal
    Battery typestandard size "AA" cells (LR6) for about 50 h operation at 20 °C
    (68 °F); alternatively use optional AC adapter
    Operating temperature0 to + 50 °C (32 to 122 °F)

    Warranty

    • Standard 2-year limited warranty on electronic parts of the roll hardness tester
    • Optional extended warranty periods up to 3 additional years

    Please contact us for more information on the roll hardness tester Parotester 2.