EQUOTIP PRODUCT VARIATIONS

The impact devices are delivered with impact body, support rings, cleaning brush and 4-pole cable.

Equotip Impact Devices

TypeApplicationImpact energyWeight
DUniversal unit.
For the majority of your hardness testing requirements.		11 Nmm75 g
GIncreased impact energy.
For solid components, e.g. heavy castings and forgings.		90 Nmm250 g
DLSlim front section.
For measurements in confined spaces, at the base of grooves or on recessed surfaces.
Note: The impact device DL can only be used with manual correction for impact direction.		11 Nmm100 g
EDiamond ball indenter.
For measurements especially in the very high hardness range (in excess of 50 HRC / 650 HV): Tool steels with high carbide content inclusions.		11 Nmm80 g
SCeramics ball indenter.
For measurements in the very high hardness range (always in excess of 50 HRC / 650 HV): Tool steels with high carbide content inclusions.		11 Nmm80 g
CReduced impact energy.
Surface hardened components, coatings, thin walled or impact sensitive components (small measuring indentation).		3 Nmm75 g
DCShort device.
For use in very confined spaces, e.g. in holes, cylinders or for internal measurements on assembled machines.		11 Nmm50 g
SVP 40 Wedge seating tester.
Semi-automatic device for the fast evaluation of the wedging (seating and regularity) of stator windings.		28 Nmm1000 g

Support Rings

The testers only work properly when the impact body is held to the proper distance from the test surface during impact. The wide selection of support rings permits testing on a great variety of part geometries, from flat surfaces to concave or convex cylindrical or spherical test surfaces. Support rings are easy to use – simply thread them on to the end of the impact device while ensuring perfect adaptation of the tester to the sample.